"Quality In Steel"
800.321.9310 | 216.475.7300

Wear Resistant Materials

TUF-PIPE™ 600 – Induction Hardened I.D. Wear Pipe

TUF-PIPE 600 is designed to substantially extend service life where material flow causes premature wear in conveyance systems. Our standard pipe is available in 20ft and 40ft lengths to minimize the need for couplings. These are steel pipe sections that have been thermally hardened to ensure maximum wear resistance. The I.D. is extremely hard, while the O.D. provides additional wear resistance at a hardness range that ensures ductility. Custom sweeps and bends are offered to minimize your need for various elbows, and to minimize drag and promote flow.

Wall thickness wear may be monitored by use of Ultrasonic equipment to gage remaining service life without disassembling the line. When wear is detected, simply rotate the pipe section to start the service life over, without replacing the pipe.

Typical Mechanical Properties

Inside Diameter Hardness 600 BHN
Outside Diameter Hardness 300 BHN

Applications

  • Raw Coal
  • Fly & Bottom Ash
  • Casting Sand
  • Broken Glass
  • Slurry
  • Rock & Stone
  • Wood Chips
  • Grain & Rice

Available Lengths

10 Ft and 20 Ft Lengths
Custom Lengths (call office for details)
Long & Short Radius Bends
Laterals & Special Tees

End preparation available for welding or for couplings. Sweeps and custom elbows are available with flanges welded in place.

Additional data regarding welding and general fabrication is available upon request. Contact our Cleveland offices for further information.

Available Sizes*

3" SCH 80 .300" Wall Thk 3.50" O.D.
4" SCH 80 .337" Wall Thk 5" SCH 80
5" SCH 80 .375" Wall Thk 5.583" O.D.
6" SCH 80 .432" Wall Thk 6.625" O.D.
8" SCH 80 .500" Wall Thk 8.625" O.D.
10" XH .500" Wall Thk 10.75" O.D.
12" XH .500" Wall Thk 12.75" O.D.
14" XH .500" Wall Thk 14.00" O.D.
16" XH .500" Wall Thk 16.00" O.D.
18" XH .375" Wall Thk 18.00" O.D.
20" XH .375" Wall Thk 20.00" O.D.
22" XH .375" Wall Thk 22.00" O.D.
24" XH .438" Wall Thk 24.00" O.D.
6" SCH 80 .280" Wall Thk 6.560" O.D.
8" SCH 80 .322" Wall Thk 8.644" O.D.
10" SCH 80 .365" Wall Thk 10.730" O.D.
12" SCH 80 .375" Wall Thk 12.750" O.D.
14" SCH 80 .375" Wall Thk 14.00" O.D.
* Note: Standard wall roughly conforms to SCH 40.
   Extra Heavy wall roughly conforms to SCH 80.