"Quality In Steel"
800.321.9310 | 216.475.7300

Wear Resistant Materials

SHEFFIELD™ 14% MANGANESE PLATE

Sheffield 14% Manganese is a true Hadfield Austenitic Manganese steel for resistance to severe impact and abrasive wear. This product will work harden in service up to 550 BHN. Because this product hardens under cold work conditions care should be taken when forming, drilling or machining is being considered.

Sheffield 14% Manganese can be welded with standard manganese electrodes. Please use only certified personnel who are familiar working with this type of material. Drilling is not recommended for this product.

Advantages

• Resistance to high abrasion and severe impact.
• Will work hardened rapidly to 550BHN.
• Remains ductile throughout.
• Hadfield Grade.
• Can be welded.
• Has non-magnetic properties.
• Can be cut with oxy-acetylene torch, plasma, water jet, or laser.
• Made to the toughest standards in the industry for extended service life.

Applications

  • Wheelabrators
  • Shake-Out Decks
  • Shot Blast Cabinets
  • Sintering Seal Bars
  • Scrappers
  • Screens
  • Crusher Liners
  • Grader Blades
  • Elevator Buckets
  • Baffle Plates
  • Stone Chutes
  • Bucket Liners
  • Crusher Jaws
  • Hammers
  • Chain Wear Bars
  • Grizzly Bars

Typical Mechanical Properties*

Hardness (as delivered) 250 BHN
Tensile Strength 132,000 P.S.I. Min.
Yield Strength 90,000 P.S.I. Min.
After Work Hardening 550 BHN
* Actual field results may vary depending upon the
   application and overall conditions of use.

Available Plate Sizes*

1/4" 1/2" 3/4" 1-1/4" 2"
3/8" 5/8" 1" 1-1/2" 3"
* Call for availability on all sizes.

Available Widths and Lengths*

Widths: 48" 60" 72" 96"
Lengths: 120" 144" 240"  
* Call for availability on all sizes.

Call for availability on all squares, flats, and rounds.

Manganese Angle - 1/4"x 2"x 2" x 18 Ft R/L